Embedded Linux BSP Engineer

About the Role:

We’re looking for an experienced Embedded Linux BSP Engineer to drive end-to-end BSP development and hardware enablement on ARM Cortex-A based SoCs. You will work across bootloader, Linux kernel, device drivers, camera/multimedia subsystems, hardware acceleration, and embedded Linux build systems to develop stable, scalable, and production-ready platforms.

What You’ll Work On:

● End-to-end board bring-up and BSP development on custom ARM-based hardware, including U-Boot customization, Linux kernel porting, Device Tree development, peripheral enablement, and BSP maintenance using Yocto / Buildroot.

● Linux kernel driver development and integration for common peripherals such as I2C, SPI, UART, CAN, GPIO, Ethernet, and high-speed interfaces including PCIe and MIPI CSI/DSI.

● Enablement and integration of SoC hardware acceleration blocks such as VPU, ISP, NPU, and crypto accelerators, including kernel, firmware, and userspace integration.

● System-level debugging, profiling, and performance optimization across the bootloader, kernel, drivers, multimedia stack, and userspace applications.

● Debugging hardware/software integration issues using kernel logs, sysfs/debugfs, V4L2/media tools, GDB, tracing and profiling tools.

● Collaboration with hardware teams for schematic review, datasheet/reference-manual analysis, register-level debugging, interface validation, and board bring-up.

● Development and maintenance of production-ready Embedded Linux platforms, including hardware validation, system configuration, security hardening, and support for multiple product variants.

What We’re Looking For:

● 1–5 years of hands-on experience in Embedded Linux BSP, board bring-up, kernel, or device-driver development.

● Strong proficiency in C/C++ with a good understanding of Linux kernel architecture, driver models, kernel subsystems, and kernel/userspace interfaces.

● Proven experience building and maintaining Yocto / Buildroot-based BSPs, including custom layers, recipes, kernel configuration, Device Tree modifications, package integration, and custom Linux image generation.

● Experience with Linux kernel configuration, compilation, patching, debugging, and driver integration.

● Hands-on experience with ARM Cortex-A based SoCs and board-level hardware bring-up.

● Ability to read and interpret schematics, SoC reference manuals, and component datasheets, and perform register-level debugging.

● Good understanding of Linux device tree, kernel logs, sysfs/debugfs, and system-level debugging methodologies.

● Ability to work closely with hardware, firmware, application, and validation teams to identify and resolve system-level issues.

Good to Have:

● Experience with GStreamer and Linux multimedia frameworks, including V4L2 integration and hardware-accelerated H.264/H.265 encode/decode.

● Experience with camera sensor bring-up, MIPI CSI-2, V4L2, Media Controller framework, sensor drivers, and camera Device Tree configuration.

● Exposure to ISP architecture, ISP bring-up and tuning, sensor-to-ISP integration, RAW Bayer processing, image-quality validation, and AE/AWB/AF (3A) concepts.

● Experience debugging camera pipelines using v4l2-ctl, media-ctl, GStreamer debugging tools, kernel logs, and media-controller graphs.

● Understanding of camera timing, CSI-2 bandwidth, pixel formats, frame rates, buffer management, frame synchronization, and dropped-frame analysis.

● Experience with multimedia performance profiling, including latency, throughput, CPU/memory utilization, buffer handling, zero-copy pipelines, and frame-drop analysis.

● Familiarity with MAVLink, UAV/drone systems, telemetry, or Ground Control Station integration is an added advantage.